Zum Inhalt springen

Zustandsgleichung von Jones-Wilkins-Lee

aus Wikipedia, der freien Enzyklopädie

Die Zustandsgleichung von Jones-Wilkins-Lee wird für den durchreagierten Zustand von Sprengstoffen verwendet.

<math> p=A \cdot \left( 1 - \frac{\omega}{R_1 \cdot V} \right) \cdot \exp (-R_1 \cdot V) + B \cdot \left( 1 - \frac{\omega}{R_2 \cdot V} \right) \cdot \exp (-R_2 \cdot V) + \frac{\omega \cdot e_0}{V} </math>

Es ist <math> V = \rho_{e} / \rho </math> mit <math> \rho_e </math> = Dichte des Sprengstoffs und <math> \rho </math> = Dichte der Detonationsprodukte. Die Parameter <math> A </math>, <math> B </math>, <math> R_1 </math>, <math> R_2 </math> und <math> \omega </math> sind Tabellenwerken zu entnehmen (s. Dobratz et al.). Dort sind auch die für den gewählten Sprengstoff notwendigen Angaben zu Anfangsdichte <math> \rho_0 </math>, Detonationsgeschwindigkeit <math> V_D </math>, Chapman-Jouguet-Druck <math> P_{CJ} </math> und der im Sprengstoff enthaltenen chemischen Energie <math> e_0 </math> aufgeführt. Die JWL-Zustandsgleichung ist an Versuchsergebnisse einfach anzupassen und wird durch eine Summe <math> p_S = \sum \phi_i(\nu) </math> bei konstanter Energie ermittelt, d. h. die Isentrope ist die Basis für die Zustandsgleichung. Die Isentrope ist dabei eine erste Näherung der Zustandsgleichung bei niederen Drücken.

Beispiele für Parameter der JWL-Zustandsgleichung

TNT

<math>\rho_0 = 1{,}630\,\mathrm{g/cm}^3</math> ; <math>v_{D} = 6930\,\mathrm{m/s}</math>; <math>p_{CJ} = 21{,}0\,\mathrm{GPa}</math>; <math>A = 373{,}8\,\mathrm{GPa}</math>; <math> B = 3{,}747\,\mathrm{GPa}</math>; <math>R_1 = 4{,}15</math>; <math>R_2 = 0{,}90</math>; <math>\omega = 0{,}35</math>; <math>e_0 = 6{,}00\,\mathrm{GPa}</math>

Composition B

<math>\rho_0 = 1{,}717\,\mathrm{g/cm}^3</math>; <math>v_{D} = 7980\,\mathrm{m/s}</math>; <math>p_{CJ} = 29{,}5\,\mathrm{GPa}</math>; <math>A = 524{,}2\,\mathrm{GPa}</math>; <math>B = 7{,}678\,\mathrm{GPa}</math>; <math>R_1 = 4{,}20</math>; <math>R_2 = 1{,}10</math>; <math>\omega = 0{,}35</math>; <math>e_0 = 8{,}50\,\mathrm{GPa}</math>

Literatur